Aller au contenu
  • En ligne récemment   0 membre est en ligne

    • Aucun utilisateur enregistré regarde cette page.

Messages recommandés

Posté(e)

bonjour, je fait un topic car j ai un soucis,plusieurs defaults en meme temps,plus d affichage clim,le plafonnier ne marche pas,l autoradio ne marche pas,les vitres electriques ne marchent pas(a part quand je laisse la porte ouverte et je rebranche la batterie,les deux avants descendent)le reglage sur le siege electrique des lombaires fonctionne plus.

 

je pense au boitier confort sous le tapis conducteur?

Posté(e)

lesquels? ceux sur le cotés de la planche de bord? c est deja fait, rien a signaler.

 

pour info la reference du boitier confort,c est une version us,8h0959433c.

Posté(e)

Oui je pense qu'un passage au vagcom donnerait précisément les modules en erreur

 

Donc soit un module à lâché, soit y a un court jus quelque part qui empèche son bon fonctionnement.

Posté(e)

bonjour, j ai essayé avec un cable odb et vagcom, mais il bug sur un calculateur, apparement il n arriverais a faire le tour quand je fait un scan( peut etre que ma version de vagcom est pas approprié...)

Posté(e)

les B6 fonctionnent avec les versions :

404 Avril 2004

409 Septembre 2004

504 Avril 2005

512 Décembre 2005

607 Juillet 2006

704 Avril 2007

805 Mai 2008

908 Aout 2009

10.6 Juin 2010

11.11 Novembre 2011

Posté(e)

si ton module confort est hs il ne repondra peut etre pas au vcds

Posté(e)

ok j ai le vagcom 311.2

ça devrait marcher les premières B6 datent de fin de 2000. ton vagcom de Novembre 2003

Posté(e)

je trouve pas de version vcds, j ai commander un boitier

Posté(e)

la reference du boitier est celle ci: 8h0959433c

vu qu il est d occasion aurais je les meme fonctions que d origine ou il y a quelque choses a faire?

audi c est des bolos, ils chipotent parce que la voiture est etrangere....

Posté(e)

bonjour a tous, donc je recois mon boitier aujourd hui et qui est ce qui pourrais me dire comment coder tous sa?il prennent combien chez audi?

Posté(e)

tu branches ton vag tu vas dans le module 46

Coding

  • +00001 = GB-Alarm (not USA)
  • +00002 = Confirmation Anti-Theft Warning System (Blink)
  • +00004 = Selective Central Locking (SCL)
  • +00008 = Anti-Theft Warning System
  • +00016 = Rear Lid Release Locking at 5 km/h
  • +00032 = Central Locking at 15 km/h (or 10 mph)
  • +00064 = Comfort Function via Remote Control (not USA)
  • +00128 = Right Hand Drive (RHD)
  • +00256 = Avant
  • +00512 = Confirmation Close via Remote (1x Blink)
  • +01024 = Confirmation Anti-Theft Warning System Horn Activation
  • +02048 = Door-/Window Regulator Logic
  • +04096 = Thatcham Anti-Theft Warning (not USA)
  • +08192 = No Safe-Function
  • +16384 = Side Windows with Insulated Glass

Note: Coding is the sum of the individual options. Not all options apply for all control modules!

tu additionnes les valeurs de ce que tu as et voila ton code

 

ensuite il y a les adaptations

Adaptation

 

Channel 000: Remote Control Clearing

 

This Adaptation Channel is used to clear all matched Remote Controls. This is often necessary prior to matching new remotes.

 

Channel 021: Remote Control Matching

 

[select]

[46 - Central Convenience]

[Adaptation - 10]

Channel 021.

[Read]

  • Choose the memory position you want the new key be matched on by entering it's number (e.g. "3" for memory position 3). Make sure to TYPE IN the number instead of scrolling up to it, otherwise you will not be able to click [Test].

[Test]

  • Now press any button on the remote you want to match.
  • The meas. block field above will change from Not Recogn. to Recognized.

[save]

 

[Done, Go Back]

[Close Controller, Go Back - 06]

Notes: You can check the current memory positions using Meas. Block 007. If remotes are recognized but not functional see the Remote Control Synchronization procedure and Special Notes .

 

Channel 061: Variant Reduction

  • +1 = Rear Mechanical Window Regulators (PR-4R5) installed
  • +2 = Footwell Lights (PR-QQ1) installed
  • +4 = Fuel Tank Lid/Flap Release Button (PR-4K2/4K8) installed

Note: Adaptation value is the sum of the individual options.

 

Channel 062: Comfort Functions

  • +001 = Comfort closing via remote for window regulators (not USA)
  • +002 = Comfort opening via remote for window regulators (not USA)
  • +004 = Comfort closing via lock cylinder for window regulators
  • +008 = Comfort opening via lock cylinder for window regulators
  • +016 = Comfort closing via remote for sunroof (not USA)
  • +032 = Comfort opening via remote for sunroof (not realized)
  • +064 = Comfort closing via lock cylinder for sunroof
  • +128 = Comfort opening via lock cylinder for sunroof (not realized)

Note: Adaptation value is the sum of the individual options.

 

Special Procedures

 

Remote Control Synchronization

 

The 8E/8H platform Audi A4 is noted for losing remote control synchronization after low voltage conditions as explained in several TSBs. If the remotes are not functional after performing the Remote Control Matching the following synchronization may be necessary:

  • Press any button on remote control.

If vehicle does not respond by locking or unlocking:

  • Lock and unlock vehicle within 30 seconds using driver-side lock with the door closed.
  • Open the door and insert the key in the ignition turning it to the On position.
  • Remove the key from the ignition.
  • Press any button on remote control.
  • Now check function of synchronized remote control.

 

Special Notes

 

The 8E/8H platform comfort system module has assigned positions, like parking spots 1, 2, 3 and 4, for each remote. This is critical when matching new remotes.

  • If you are having problems with the Remote Control Matching, please pay special attention to the instructions above:
    • Make sure to TYPE IN the number instead of scrolling up to it, otherwise you will not be able to click [Test].

 

Video Link

 

2001 - 2008 A4 (8E/8H) Remote Learning

Posté(e)

waouh!!!!

il y a marquer not usa sur pas mal de tes lignes d options....... ma voiture vient des etats unis soit usa

 

bon le probleme apres la pose de mon nouveau boitier n est pas resolu...

toujours le bloc clim auto et autoradio sans reaction eteint de chez eteint!

 

bon deja photo des 2 boitiers avec les references

 

mini_121122102120706885.jpg

 

sa na pas changer grand chose!

Posté(e)

cherche quelqu un qui vcds pour trouver le probleme svp ou qui peut me le passer.

Créer un compte ou se connecter pour commenter

Vous devez être membre afin de pouvoir déposer un commentaire

Créer un compte

Créez un compte sur notre communauté. C’est facile !

Créer un nouveau compte

Se connecter

Vous avez déjà un compte ? Connectez-vous ici.

Connectez-vous maintenant
×
×
  • Créer...