compte tour audi S4 b5

[ryf]

Bonjour a tous ,

 

j'ai une audi S4 B5 qui est préparé chez MTM , donc j'ai 390ch a peu près ,et j'ai un problème de compte depuis quelque jour ,l'aiguille

 

monte directement a 2000 tours et ne reste pa stable et quand j'accelere elle ne suit pas le regime moteur .Est ce que vous avez eu le meme

 

probleme ? et je veux installer un autre compte tours avec shift light et je veux savoir ou prendre le signal du compte tour sur le calculateur .

 

Je vis à Madagascar .

[Dinozzo]

Salut :coucou:

 

Avant toute chose as-tu passer l'auto au VAGCom pour voir si tu as un défaut quelque part ?

Ca pourrait très bien aussi venir du compte tours lui-même (moteur hs)

[Dinozzo]

Sinon j'ai ça mais c'est en anlais

Il semblerais que le signal RPM soit sur le connecteur 32 pin bleu fil N°11 que ce soit sur Ph1 ou Ph2

 

Audi > B5 Platform > 1996 - 2002

Electrical Equipment

90 - Instruments - Instrument cluster, terminal assignments

 

Blue 32-pin multi-pin connector for basic functions

1 - Terminal 15

2 - Brake pad wear

3 - Tachometer output 1

4 - not occupied

5 - Tank sensor

6 - Tank warning OBD 2

7 - Terminal 31 (sensor Ground (GND))

8 - Coolant temperature

9 - Terminal 31 (load Ground (GND))

10 - Oil pressure 2 (high)

11 - RPM signal

12 - A/C shut-off

13 - E-Gas/glow plug control

14 - Level control

15 - Terminal 58d

16 - Trailer turn signal

17 - High beam

18 - Left turn signal

19 - not occupied

20 - Terminal 58s

21 - Driver door contact

22 - Low coolant

23 - Terminal 30

24 - Terminal 31 (load Ground (GND))

25 - Consumption signal

26 - Right parking light

27 - Left parking light

28 - Tachometer input

29 - Brake

30 - S-contact

31 - Tachometer output 2

32 - ESP/ASR

 

Green 32-pin multi-pin connector for auxiliary functions

1 - Door contact (all doors)

2 - Transponder 1

3 - not occupied

4 - not occupied

5 - W-wire

6 - Tailgate

7 - Right turn signal

8 - External buzzer

9 - External gong

10 - Airbag

11 - Stand-still time output

12 - Terminal 61

13 - Parking brake/BRAKE

14 - CHECK

15 - Oil level/oil temperature

16 - not occupied

17 - Transponder 2

18 - CAN high speed (powertrain) (high +)

19 - CAN high speed (powertrain) (low -)

20 - CAN high speed (powertrain) (screen)

21 - ABS

22 - CAN low speed (comfort) (high +)

23 - CAN low speed (comfort) (low -)

24 - CAN low speed (comfort) (screen)

25 - Engine lid

26 - not occupied

27 - Belt buckle

28 - K-wire

29 - Outside temperature -input

30 - not occupied

31 - Selector range display

32 - not occupied

 

Gray 32-pin multi-pin connector for multi-function display

1 - Menu selection switch (menu)

2 - Menu selection switch (out A )

3 - Menu selection switch (out B )

4 - Menu selection switch (Enter)

5 - CAN high speed display (high +)

6 - CAN high speed display (low -)

7 - CAN high speed display (screen)

8 - Passenger door contact

9 - Right rear door contact

10 - Left rear door contact

11 - Enable

12 - Clock

13 - Data

14 - Brake light

15 - Windshield washer fluid level

16 - Rear lights/low beams

17 - Left board computer

18 - Right board computer

19 - Board computer, reset

20 - not occupied

21 - not occupied

22 - not occupied

23 - Button branch 1 navigation

24 - Button branch 2 navigation

25 - Button branch Telematic

26 - not occupied

27 - not occupied

28 - not occupied

29 - not occupied

30 - not occupied

31 - not occupied

32 - not occupied

 

-------------------------------------------------------

Audi > B5 Platform > 1996 - 2002

Electrical Equipment

90 - Instruments - Instrument cluster, terminal assignments (1998 through 1999)

 

Blue, 32-pin connector for basic functions,

1 - Terminal 15

2 - Turn signal, right

3 - Speedometer output 1

4 - Open

5 - Sender for fuel gauge

6 - Airbag

7 - Terminal 31 sensor Ground (GND)

8 - Coolant temperature

9 - Terminal 31 load Ground (GND)

10 - Oil pressure switch

11 - Engine speed (RPM) signal

12 - Terminal 61

13 - CAT

14 - Self leveling suspension

15 - Terminal 58d

16 - Malfunction Indicator Lamp (MIL)

17 - High beam

18 - Turn signal, left

19 - ABS

20 - Terminal 58s

21 - Door contact (driver's door)

22 - Engine coolant low

23 - Terminal 30

24 - Terminal 31 load Ground (GND)

25 - K-wire

26 - Parking light, right

27 - Parking light, left

28 - Speedometer (input)

29 - Brake fluid level/pressure

30 - S-contact

31 - Seat belt buckle

32 - Electronic Stability Program (ESP)

 

Green, 32-pin connector for additional functions

1 - Open

2 - Open

3 - Open

4 - Open

5 - W-wire

6 - Tailgate (Lowline model only)

7 - Brake pad (Highline model only)

8 - Input for outside buzzer control (currently not assigned)

9 - Input for outside chime control (currently not assigned)

10 - Low fuel level warning-output signal for Engine Control Module (ECM)

11 - Standing time output

12 - Air conditioning cutout

13 - Parking brake

14 - Electronic throttle

15 - Side marker light

16 - Open

17 - Open

18 - Open

19 - Open

20 - Open

21 - Oil temperature

22 - Open

23 - Open

24 - Open

25 - Open

26 - Open

27 - Open

28 - Open

29 - Open

30 - Speedometer output 2

31 - Open

32 - Open

 

Red, 20-pin connector for multi-function display

1 - Fuel consumption signal

2 - Open

3 - Open

4 - Open

5 - Outside air temperature

6 - Selector lever display

7 - Open

8 - Open

9 - Washer fluid

10 - Hydraulic pressure

11 - Trip computer reset

12 - Clock signal for radio frequency display

13 - Data signal for radio frequency display

14 - Trip computer (forward sequence)

15 - Enable signal for radio frequency display

16 - Tail lights/headlight low beam (indicator lights)

17 - Open

18 - Trip computer (reverse sequence)

19 - Brake lights

20 - Open