vitesse digitale

[guigui1160]

Bonjour,

 

quelqu'un sait si c'est possible d'activer la vitesse en analogique au milieu des conteurs ?

 

merci d'avance

Modifié 19 décembre 2014 par guigui1160

[WAUZZZ]

Salut,

 

Le terme "analogique" pour un compteur ou une horloge désigne un affichage qui se fait avec des aiguilles (réelles ou virtuelles)

Donc, c'est l'affichage numérique ou digital de la vitesse que tu souhaites activer.

Quel est le P/N du porte instruments ?

Voici quelques adaptations possibles sur le PI mais cela varie en fonction du P/N :

http://wiki.ross-tech.com/wiki/index.php/Audi_A6_(4F)_Instrument_Cluster_(through_MY_2008)#Coding

@+

Modifié 20 décembre 2014 par WAUZZZ

[guigui1160]

je ne comprends pas vraiment la manip qu'il faut faire ?!

[WAUZZZ]

Il faut que tu interroges le calculateur N°17 et que tu nous indiques la référence du calculateur qu'a trouvé VCDS.

Tu as des chances même de trouver en grisé sur l'écran un lien qui te permet d'accéder à un fichier LABEL du type "4F0 907 256.lbl". Tu double-cliques sur ce fichier et s'il existe une procédure pour activer la vitesse digitale, cela devrait être mentionné.

@+

[guigui1160]

Bonjout.

Alors voici le numero 4F0 910 930 A.

Et je joins ci dessous le fichier lbl... Si quelqu un voit quelque chose d utile... Merciii

;

; VCDS Label File

;

; Copyright � 2008+ Ross-Tech, LLC

;

; Audi A6 (4F)

;

; Component: J285 - Instrument Cluster (#17)

;

; P/N: 4F0-910-???-???

;

; This file is part of a label file package,

; make sure you have all of the following files.

;

; 4F-17.LBL

; 4F0-910-xxx-17.LBL

;

; includes measuring blocks, adaptation, coding, security access

; selective output test and service reset

;

; created on 14/Jul/2005 by Sebastian Stange ([email protected])

;

; last modification on 12/Oct/2012

;

; requires VCDS 805.0 or newer

;

;

;---------------------------------------------------

;

; measuring block

;

;---------------------------------------------------

;

;

001,0,General

001,1,Vehicle Speed

001,2,Engine Speed

001,3,Oil Pressure,(1.2 bar)

001,4,Time

;

002,0,General

002,1,Mileage

002,2,Remote Clock,(Test Mode)

002,3,Tank Content

;

003,0,General

003,1,Coolant,Temperature

003,2,Standing Time

003,3,Dimming Signal,(Terminal 58d)

003,4,Dimming Signal,(Terminal 58s)

;

004,0,Supply Voltage && Outside Temperature

004,1,Supply Voltage,(Terminal 30)

004,2,Outside Temp.,(NTC)

004,3,Outside Temp.,(via CAN),from Climate Control

004,4,Outside Temp.,(Display)

;

005,0,Service Reminder

005,1,Distance since,Service exceeded,Unit: 100 km

005,2,Time since,Service exceeded,Unit: 1 day(s)

005,3,Remaining dist.,until Service,Unit: 100 km

005,4,Remaining time,until Service,Unit: 1 day(s)

;

006,1,Min. (M2) Oil Level,in Service Interval

006,2,Max. (M2) Oil Level,in Service Interval

006,3,Long Time Average,Oil Level Dif.,

006,4,Engine Hood,Contact,Display Range: Open/Closed

;

007,1,Min. (M3) Oil Level,in Service Interval

007,2,Max. (M3) Oil Level,in Service Interval

007,3,Fast Average,Oil Level Dif.,

;

010,0,Adaptation Channel 003

010,1,Adaptation,Channel

010,2,Consumption,Correction,See Adaptation Channel 003

;

011,0,Adaptation Channels 009 && 019

011,1,Adaptation,Channel

011,2,Mileage,,See Adaptation Channel 009

011,3,Adaptation,Channel

011,4,Remote Control,Clock Synchron.,See Adaptation Channel 019

;

012,0,Adaptation Channels 040 && 041

012,1,Adaptation,Channel

012,2,Mileage,since Service,See Adaptation Channel 040

012,3,Adaptation,Channel

012,4,Time,since Service,See Adaptation Channel 041

;

013,0,Adaptation Channels 042 && 043

013,1,Adaptation,Channel

013,2,Minimum Mileage,to Service,See Adaptation Channel 042

013,3,Adaptation,Channel

013,4,Maximum Mileage,to Service,See Adaptation Channel 043

;

014,0,Adaptation Channels 044 && 049

014,1,Adaptation,Channel

014,2,Maximum Time,to Service,See Adaptation Channel 044

014,3,Adaptation,Channel

014,4,Minimum Time,to Service,See Adaptation Channel 049

;

015,0,Adaptation Channel 045

015,1,Adaptation,Channel

015,2,Oil Quality,,See Adaptation Channel 045

;

016,0,Adaptation Channels 047 && 048

016,1,Adaptation,Channel

016,2,Soot Entry,,See Adaptation Channel 047

016,3,Adaptation,Channel

016,4,Thermal Load,,See Adaptation Channel 048

;

019,0,Adaptation Channels 029 && 030

019,1,Adaptation,Channel

019,2,Fuel Gauge,Sender 2,See Adaptation Channel 029

019,3,Adaptation,Channel

019,4,Fuel Gauge,Sender 1,See Adaptation Channel 030

;

020,0,Adaptation Channel 035

020,1,Adaptation,Channel

020,2,Engine Speed,Threshold,See Adaptation Channel 035

;

021,0,Adaptation Channels 038 && 039

021,1,Adaptation,Channel

021,2,Oil Minimum,Detection Sensor,See Adaptation Channel 038

021,3,Adaptation,Channel

021,4,TOG,,See Adaptation Channel 039

;

026,0,Fuel Sender(s)

026,1,Fuel Sender 1,(Resistance)

026,2,Fuel Sender 1,(Tank Content)

026,3,Fuel Sender 2,(Resistance)

026,4,Fuel Sender 2,(Tank Content)

;

029,0,Wheel Circumference

029,1,Mean wheel,circumference,used for odometer

029,2,Max. wheel,circumference,used for speedometer

;

120,0,Connector Status I

120,1,Brake Fluid,Connector

120,2,Washer Fluid,Connector

120,3,Coolant Level,Connector

120,4,Oil Level,Connector

;

121,0,Connector Status II

121,1,Brake Pad Waer,Indicator Connect.

;

124,0,CAN-Databus Error Counter

124,1,CAN-Databus,Error Counter

;

125,0,CAN-Databus Communication (Powertrain)

125,1,CAN-Gateway,,Specification: Gateway 1

;

220,0,Miscellaneous

220,1,Sum of Fill,Level Differences

220,2,Count of summed,Fill Level Diff.

;

221,0,Miscellaneous

221,1,Theoretical,Service Interval,Increments: 1.000 km

221,2,Year Driving,Performance,Increments: 100 km

221,3,Short Time Average,Oil Level Dif.

221,4,After Totalling,Fill Level Values

;

222,0,Miscellaneous

222,1,Minimum Mileage,to Service,Increments: 1.000 km

222,2,Maximum Mileage,to Service,Increments: 1.000 km

222,3,Minimum Time,to Service,Increments: 1 month

222,4,Maximum Time,to Service,Increments: 1 month

;

223,0,Miscellaneous

223,1,Average Driving,Distance

;

224,1,Curr. (M2) Oil Level,in Service Interval

224,2,Error Counter,Component Prot.

;

;

;---------------------------------------------------

;

; security access

;

;---------------------------------------------------

;

;

S00,Instrument Cluster (J285) Security Access

S01,13861 = Adaptation Enabling

;

;

;---------------------------------------------------

;

; adaptation

;

;---------------------------------------------------

;

;

A002,0,Service Reminder

A002,5,Service Reminder

A002,6,0 = Service NOT Due

A002,7,1 = Service Due

A002,8,

A002,9,To reset the service reminder save 0 as new value.

;

A003,0,Consumption Correction

A003,5,Consumption Correction

A003,6,Standard Value: 100 %

A003,7,Display Range: 85...115 %

A003,8,Increments: 1 %

A003,9,

A003,10,Calculation based on volume per distance (e.g. l/100km):

A003,11,New Adaptation Value = Old Adaptation Value * Calculated Consumption / Old Display Value

A003,12,Calculation based on distance per volume (e.g. MPG):

A003,13,New Adaptation Value = Old Adaptation Value * Old Display Value / Calculated Consumption

;

A009,0,Mileage/Odometer

A009,5,Mileage/Odometer

A009,6,Increments: 1 = 10 km or 1 = 10 mi

A009,9,The distance can only be changed once before

A009,10,the current value is not over 100 km/62 mi.

A009,11,After changing the value can be corrected

A009,12,within the next 5 km/3 mi.

;

A019,0,Remote Clock

A019,5,Remote Clock

A019,6,Set the remote clock synchronization time.

A019,7,

A019,8,0 = Remote Clock not installed

A019,9,1...50 = Synchronization Time (in minutes)

;

A029,0,Tank Characteristic (Fuel Level Sensor 2)

A029,5,Tank Characteristic (Fuel Level Sensor 2)

A029,6,Parallel shift of tank characteristic by +/- 32 Ohm.

A029,7,

A029,8,Standard Value: 128

A029,9,Value Range: 96...160 (-8.0...+8.0 l)

A029,10,Increments: 1 = 1 Ohm = 1/4 l

;

A030,0,Tank Characteristic (Fuel Level Sensor 1)

A030,5,Tank Characteristic (Fuel Level Sensor 1)

A030,6,Parallel shift of tank characteristic by +/- 32 Ohm.

A030,7,

A030,8,Standard Value: 128

A030,9,Value Range: 96...160 (-8.0...+8.0 l)

A030,10,Increments: 1 = 1 Ohm = 1/4 l

;

A031,0,Tank Characteristic (Wet Calibration)

;

A032,0,Tank Characteristic (Not detactable Tank Volume)

A032,5,Tank Characteristic (Not detactable Tank Volume)

A032,6,The tank volume which is not recordable by the fuel gauge

A032,7,sender(s). Make sure to enter this value before performing

A032,8,the "wet calibration" (Channel 031).

;

A033,0,Tank Characteristic (Full Calibration)

A033,5,Tank Characteristic (Full Calibration)

A033,6,Non-parallel shift of the tank characterictic above a readout of 1/2.

A033,7,To start the adaptation enter '65535' as new value.

A033,8,

A033,9,Standard Value: 128

A033,10,Value Range: 112...144 (-4.0...+4.0 l)

A033,11,Increments: 1 = 1 Ohm = 1/4 l

;

A035,0,Speed Threshold

A035,5,Speed Threshold

A035,6,This value represents the speed threshold of the

A035,7,dynamic oil pressure system. The threshold can be

A035,8,raised in increments of 250 RPM.

A035,9,

A035,10,NOTE: Perform Security Access first.

;

A038,0,Oil Minimum Detection

A038,5,Oil Minimum Detection

A038,6,With this function the oil-minimum-warning at

A038,7,low oil level can be deactivated or activated.

A038,8,0 = Oil Minimum Detection not activated

A038,9,1 = Oil Minimum Detection activated

A038,10,

A038,11,NOTE: Perform Security Access first.

;

A039,0,Oil Level Sensor Adaptation

A039,5,Oil Level Sensor Adaptation

A039,6,Determines if the TOG Sensor is installed or not.

A039,7,0 = TOG Evaluation from the Instrument Cluster not activated

A039,8,1 = TOG Evaluation from the Instrument Cluster activated

A039,9,

A039,10,NOTE: Perform Security Access first.

;

A040,0,Mileage since Service

A040,5,Mileage since Service

A040,6,Increments: 1 = 100 km/mi

A040,7,

A040,8,NOTE: Adaptation channels 040-049 must be

A040,9,entered and stored in the following order:

A040,10,45 > 42 > 43 > 49 > 44 > 40 > 41 > 46 > 47 > 48

;

A041,0,Time since Service

A041,5,Time since Service

A041,6,Increments: 1 = 1 day(s)

A041,7,

A041,8,NOTE: Adaptation channels 040-049 must be

A041,9,entered and stored in the following order:

A041,10,45 > 42 > 43 > 49 > 44 > 40 > 41 > 46 > 47 > 48

;

A042,0,Minimum Mileage to Service

A042,5,Minimum Mileage to Service

A042,6,Increments: 1 = 100 km/mi

A042,7,00080 - fixed Service Intervals (8.000 km - w/o Longlife)

A042,8,00150 - flexible Service Intervals (15.000 km - with Longlife)

A042,9,or (if coded to miles)

A042,10,00050 - fixed Service Intervals (5.000 mi - w/o Longlife)

A042,11,00090 - flexible Service Intervals (9.000 mi - with Longlife)

A042,12,

A042,13,NOTE: Adaptation channels 040-049 must be

A042,14,entered and stored in the following order:

A042,15,45 > 42 > 43 > 49 > 44 > 40 > 41 > 46 > 47 > 48

;

A043,0,Maximum Mileage to Service

A043,5,Maximum Mileage to Service

A043,6,Increments: 1 = 100 km/mi

A043,7,00080 - fixed Service Intervals (8.000 km - w/o Longlife)

A043,8,00300 - flexible Service Intervals (30.000 km - with Longlife)

A043,9,or (if coded to miles)

A043,10,00050 - fixed Service Intervals (5.000 mi - w/o Longlife)

A043,11,00190 - flexible Service Intervals (19.000 mi - with Longlife)

A043,12,

A043,13,NOTE: Adaptation channels 040-049 must be

A043,14,entered and stored in the following order:

A043,15,45 > 42 > 43 > 49 > 44 > 40 > 41 > 46 > 47 > 48

;

A044,0,Maximum Time to Service

A044,5,Maximum Time to Service

A044,6,Increments: 1 = 1 day(s)

A044,7,00365 - fixed Service Intervals (w/o Longlife)

A044,8,00730 - flexible Service Intervals (with Longlife)

A044,9,

A044,10,NOTE: Adaptation channels 040-049 must be

A044,11,entered and stored in the following order:

A044,12,45 > 42 > 43 > 49 > 44 > 40 > 41 > 46 > 47 > 48

;

A045,0,Oil Quality

A045

[guigui1160]

Personne ne peut m aider ?

[vevebm]

Uhmm...

Si tu veux avoir la même vue que sur la photo, le levier qui est à droite et qui sert pour les essuies glace,

en dessous tu as un bouton qui s'appelle reset, drôle de nom !

Et bien tu fais clic, clic. Donc deux fois rapidement et tu auras un affichage numérique de la vitesse.

 

Pour mémoire :

1 clic, mémoire 1,

2 clics mémoire 2

et sur le côté : défilement des items de chaque mémoire.

 

C'est comme ça sur mon a5.

 

Dis moi si ça t'a aidé ou pas !

 

Envoyé de mon CINK FIVE en utilisant Tapatalk

[guigui1160]

Quand j appuie deux fois dessus ça passe juste à la mémoire 2 mais pas de compteur de vitesse

[vevebm]

Essaye de nouveau. Tu ne dois pas cliquer suffisamment vite. En tous cas sur mon a5, ça marche.

Persiste tu vas y arriver...

 

Envoyé de mon CINK FIVE en utilisant Tapatalk

[Dinj95]

Elle est de quelle année ? A6 fl?

[guigui1160]

A6 c6 de 2006

[Dinj95]

sur les a6 c6 non fl ( facelift ) donc avant 2008 tu ne peut pas avoir la vitesse affiché en digital, va voir dans la section a6 c6 on en a parlé il y a pas longtemp

[guigui1160]

Ah merde c est nuuuuuuuuul. Merci bien les amis